Operation Manual - System Management
Quidway S3000-EI Series Ethernet Switches
7.2.2 Configure NTP ID Authentication
Enable NTP authentication, set MD5 authentication key, and specify the reliable key. A
client will synchronize itself by a server only if the serve can provide a reliable key.
Perform the following configurations in system view.
Table 7-7 Configure NTP authentication
Enable NTP authentication
Disable NTP authentication
7.2.3 Set NTP Authentication Key
This configuration task is to set NTP authentication key.
Perform the following configurations in system view.
Table 7-8 Configure NTP authentication key
Configure NTP authentication key
Remove NTP authentication key
Key number number ranges from 1 to 4294967295; the key value contains 1 to 32
ASCII characters.
7.2.4 Set Specified Key as Reliable
This configuration task is to set the specified key as reliable.
Perform the following configurations in system view.
Table 7-9 Set the specified key as reliable
Set the specified key as
reliable
Cancel the specified reliable
key.
Key number key-number ranges from 1 to 4294967295
Operation
Operation
Operation
Huawei Technologies Proprietary
ntp-service authentication enable
undo ntp-service authentication enable
ntp-service authentication-keyid number
authentication-mode md5 value
undo
ntp-service
number
Command
ntp-service
reliable
key-number
undo ntp-service reliable authentication-keyid
key-number
7-7
Chapter 7 NTP Configuration
Command
Command
authentication-keyid
authentication-keyid