Bgp - Huawei quidway s3526 series Getting Started

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
detail-suppressed: Only advertise the aggregated route.
suppress-policy route-policy-name: Suppress the specific route selected.
origin-policy route-policy-name: Select the originate routes used for aggregation.
attribute-policy route-policy-name: Set the attributes of the aggregated route.
Description
Using aggregate command, you can establish an aggregated record in the BGP
routing table. Using undo aggregate command, you can disable the function.
By default, there is no route aggregation.
The keywords is explained as follows:
Table 4-1 The use of the keywords
keywords
as-set
detail-suppressed
suppress-policy
origin-policy
attribute-policy
Example
# Create an aggregated record in BGP routing table.
[Quidway-bgp] aggregate 168.328.0.0 255.255.0.0

4.1.2 bgp

Syntax
bgp as-number
undo bgp [as-number ]
Used to produce an aggregated route whose AS path
information includes detailed routes. Use this keyword
carefully when many AS paths need to be aggregated, for the
frequent change of routes may lead to route vibration.
This keyword does not establish any aggregated route, but it
restrains the advertisement of all the specific routes. If only
some specific routes are to be restrained, use the peer
filter-policy command carefully.
Create an aggregated route with this keyword, at the same
time, the advertisement of the specified route is restrained. If
you want to restrain some specific routes selectively and
leaves other routes still being advertised, use the if-match
sub-statement of the route-policy command.
select only the specific routes that are in accordance with
route-policy to create an aggregated route.
set aggregated route attributes. The same work can be done
by using peer route-policy, etc.
Huawei Technologies Proprietary
4-2
Chapter 4 BGP Configuration Commands
use