Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches
Chapter 6 DHCP Configuration Commands
Note:
This chapter only applies to S3552G, S3552P, S3528G, S3528P, S3552F, S3526E,
S3526E FM, S3526E FS and S3526C in S3500 series switches.
6.1 DHCP Public Configuration Commands
6.1.1 dhcp enable
Syntax
dhcp enable
undo dhcp enable
View
System view
Parameter
None
Description
Using the dhcp enable command, you can enable the DHCP service. Using the undo
dhcp enable command, you can disable the DHCP service.
By default, the DHCP service is enabled.
Only after the DHCP service is enabled can other DHCP configurations take effect. This
configuration is essential to both DHCP server and DHCP relay.
Example
# Enable the DHCP service.
[Quidway] dhcp enable
Huawei Technologies Proprietary
6-1
Chapter 6 DHCP Configuration Commands