Display Snmp-Agent Mib-View - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches
The following table describes the output fields.
Table 5-1 Output description of the display snmp-agent group command
Field
groupname
Security model
readview
writeview
notifyview
storage-type

5.1.4 display snmp-agent mib-view

Syntax
display snmp-agent mib-view [ exclude | include | { viewname mib-view } ]
View
Any view
Parameter
exclude: Display the SNMP mib view excluded.
Include: Display the SNMP mib view included.
viewname: Display the SNMP mib view according to the mib view name.
mib-view: Specify the mib view name.
Description
display snmp-agent mib-view command is used to view the MIB view configuration
information of the Ethernet switch.
Example
# Display the information about the currently configured MIB view.
<Quidway> display snmp-agent mib-view
View name:mv
Storage-type: nonVolatile
View name:test
Storage-type: nonVolatile
SNMP Group name of the user
The security model adopted by SNMP
Read-only MIB view name corresponding to that group
Writable MIB view corresponding to that group
The name of the notify MIB view corresponding to that group
Storage type
MIB Subtree:internet
-included active
MIB Subtree:internet
-included active
Huawei Technologies Proprietary
5-3
Chapter 5 SNMP Configuration Commands
Description