Traffic-Redirect - Huawei quidway s3526 series Getting Started

Command Manual - QoS/ACL
Quidway S3500 Series Ethernet Switches
Note:
If you choose untrusted mode for a specific traffic in traffic-priority operation, that is,
you manually specify a service group for the designated traffic, then the traffic-limit
and traffic-statistic operations are invalid for this traffic. If you choose traffic-limit and
traffic-statistic, however, then the untrusted mode is invalid.
For the related command, see display qos-interface traffic-priority.
Example
# Auto-allocate service groups for packets match the permitted rules in ACL 4000.
[Quidway-Ethernet0/1] traffic-priority inbound link-group 4000 auto

2.3.31 traffic-redirect

Syntax
traffic-redirect inbound acl-rule { cpu | interface { interface-name | interface-type
interface-num } | next-hop ip-addr1 ip-addr2 }
undo traffic-redirect inbound acl-rule
View
Ethernet port view
Parameter
acl-rule: the rule of ACL, only the rules including these elements defined in template
can be sent to target hardware and referenced for such QoS functions as packet
filtering, traffic policing, priority re-labeling. Otherwise, the rules cannot be activated on
the hardware. The ACL combined mode is following.
Table 2-28 Combined Mode of ACL
Combined Mode
All rules in IP ACL
Only one rule in IP ACL
All rules in Link ACL
Only one rule in Link ACL
All rules in IP ACL and
one rule in Link ACL
One rule in IP ACL and
one rule in Link ACL
ip-group { acl-number | acl-name }
ip-group { acl-number | acl-name } rule rule
link-group { acl-number | acl-name }
link-group { acl-number | acl-name } rule rule
ip-group { acl-number | acl-name } link-group
{ acl-number | acl-name } rule rule
ip-group { acl-number | acl-name } rule rule link-group
{ acl-number | acl-name } rule rule
Huawei Technologies Proprietary
2-66
Chapter 2 QoS Commands
Value