Vrrp Vrid Timer - Huawei quidway s3526 series Getting Started

Command Manual - Reliability
Quidway S3500 Series Ethernet Switches
Description
Using vrrp vrid priority command, you can configure the virtual router priority. Using
undo vrrp vrid priority command, you can reset the virtual router priority.
The priority decides the status of a switch in the virtual router. A higher-priority switch is
more likely to be a Master. Priority 0 is reserved for some special purpose. 255 is
reserved for the IP address owner. The priority of the IP address owner is always 255
and cannot be modified.
Example
# Set the virtual router priority on VLAN-interface2.
[Quidway-vlan-interface2] vrrp vrid 1 priority 150

1.1.8 vrrp vrid timer

Syntax
vrrp vrid virtual-router-ID timer advertise adver-interval
undo vrrp vrid virtual-router-ID timer advertise
View
VLAN interface view.
Parameter
virtual-router-ID: VRRP virtual router ID, ranging from 1 to 255.
adver-interval: VRRP packet interval of the Master in the virtual router in seconds,
ranging from 1 to 255; By default, the value is 3s.
Description
Using vrrp vrid timer command, you can configure the virtual router timer. Using undo
vrrp vrid timer command, you can reset the virtual router timer.
This command is used to set the VRRP packet interval of the Master in the virtual router.
You are supposed to set the identical timer value for the switches in the same virtual
router to avoid improper configuration.
Example
# Configure the Master to transmit VRRP packets every 15 seconds.
[Quidway-vlan-interface2] vrrp vrid 1 timer advertise 15
Huawei Technologies Proprietary
1-7
Chapter 1 VRRP Configuration Commands