Ntp-Service Source-Interface - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches
Parameter
number: Specify the key number, ranging from 1 to 4294967295.
Description
Using ntp-service reliable authentication-keyid command, you can configure the
key as reliable. Using undo ntp-service reliable authentication-keyid command,
you can cancel the current setting.
By default, no key is configured as reliable.
When you enable the authentication, you can use this command to configure one or
more than one keys as reliable. In this case, a client will only get synchronized by a
server whichever can provide a reliable key.
Example
# Enable NTP authentication, adopt MD5 encryption, and designate Key 37 BetterKey
and configure it as reliable.
[Quidway] ntp-service authentication enable
[Quidway]
BetterKey
[Quidway] ntp-service reliable authentication-keyid 37

7.1.16 ntp-service source-interface

Syntax
ntp-service source-interface { interface-name | interface-type interface-number }
undo ntp-service source-interface
View
System view
Parameter
interface-name: Specify an interface. The source IP address of the packets will be
taken from the address of the interface.
interface-type: Specify the interface type and determine an interface with the
interface-number parameter.
interface-number: Specify the interface number and determine an interface with the
interface-type parameter.
ntp-service authentication-keyid
Huawei Technologies Proprietary
Chapter 7 NTP Configuration Commands
37
7-12
authentication-mode md5