Huawei AR150&200&1200&2200&3200 Series Enterprise
Routers
Configuration Guide - Device Management
l
l
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface
The interface for receiving NTP packets is specified.
Step 3 Run:
ntp-service [ ipv6 ] in-interface disable
The interface is disabled from receiving NTP packets.
----End
5.5.4.2 Disabling the NTP Service Function
Context
You can disable NTP services to prevent the device from being synchronized with the clock of
an external server or a symmetric peer, or when the device does not need to provide a clock
reference source for external clients.
NOTE
The existing configuration is not deleted when the NTP service function is disabled.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
undo ntp-service enable
The NTP service function on the device is disabled.
By default, the NTP service function is enabled.
----End
Issue 05 (2014-01-16)
An unreliable clock server exists on the interface. After the NTP functions are enabled, all
interfaces can receive NTP packets by default. However, an unreliable clock source makes
NTP clock data inaccurate.
The NTP clock data are modified when the interface is attacked maliciously.
interface-type interface-number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NTP Configuration
108