Information Center Configuration - Huawei AR3200 Series Configuration Manual

Enterprise routers

Hide thumbs Also See for AR3200 Series:

Table of Contents

Huawei AR3200 Series Enterprise Routers

Configuration Guide - Device Management

About This Chapter

This chapter describes how to configure the information center to control the output of logs,

alarms, and debugging messages.

2.1 Introduction to the Information Center

The information center works as the information hub of a router. It classifies and filters the output

of a system. The information center uses a debugging program to help network administrator

and developers monitor network operation and analyze network faults.

2.2 Information Center Supported by the AR3200

The information center outputs logs, alarms, and debugging messages at eight severity levels

through 10 information channels.

2.3 Enabling Log Output

This section describes how to output logs of a specific module to a log file, console, terminal,

or log host.

2.4 Enabling Alarm Output

This section describes how to configure a specific module to output alarm information to log

files, consoles, terminals, or SNMP agents.

2.5 Enabling the Output of Debugging Information

This section describes how to configure a specific module to output debugging information to

log files, consoles, terminals, or SNMP agents.

2.6 Maintaining Information Center

This section describes how to run the following commands to delete messages in the buffer of

the information center. Note that deleted messages cannot be restored.

2.7 Information Center Configuration Examples

This section provides information center configuration examples.

Issue 03 (2011-11-27)

Information Center Configuration

Huawei Proprietary and Confidential

2 Information Center Configuration

Table of Contents