Connecting To The Internet Using An Xdsl Interface - Huawei AR200-S Series Quick Start Manual

Huawei AR200-S Series Enterprise Routers
Quick Start Guide

4.1 Connecting to the Internet Using an xDSL Interface

This section describes how to connect to the Internet using an xDSL interface.
Networking Requirements
As shown in
is configured on the router so that users can connect to the Internet.
Figure 4-1 Connecting to the internet using an xDSL interface
User1
User2
User3
Table 4-1 Data plan
Physical Interface
Eth0/0/1
Eth0/0/2
Eth0/0/3
ATM0/0/0
Configuration Roadmap
1.
2.
3.
Issue 01 (2011-12-30)
Figure 4-1, users connected to the router use the same account. The dialing function
NOTE
The ADSL line is used as an example. The G.SHDSL line configuration is similar.
Eth0/0/1
Eth0/0/2
Eth0/0/3
Configure a dialer interface that obtains an IP address and the DNS server's IP address
through ADSL dialing.
Configure the router as the PPPoA client. The router connects to the Internet through the
PPPoA server.
Configure the DHCP server function.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Atm0/0/0
Router DSLAM
Logical Interface
VLANIF 1 (Eth0/0/1,
Eth0/0/2, and Eth0/0/3 are
LAN ports and belong to
VLAN 1 by default)
Dialer0
4 Connecting to the Internet
PPPoA
server
IP Address
The default IP address for
VLANIF 1 is 192.168.1.1/24.
Dialer0 obtains an IP address
and the DNS server's IP
address through ADSL
dialing.
22