Table of Contents
Advertisement
This is typically the
same number as
programmed in the
1st Extension field.
The Port Type field should display the method of integration your PBX will provide
the system. If the method is incorrect, click the drop-down box and choose another
port type from the resulting menu. If you have questions about different port type
integrations, call Connected Guests at the number shown on the front of this manual.
3. When you finish, click OK to close the Wizard and save the settings to all ports.
Setting the MWI dial-strings (certain port types only)
If your Port Types window has an MWI (message waiting indicator) tab, you can
program the codes your PBX uses to activate and deactivate message lamps.
1. Click the MWI tab in the Port Types window.
If the Port Types window wasn't open from the previous procedure, see the steps in
the last section to open the window.
INNLINE IP Installation guide
11
Chapter 1: Installation
Advertisement
Table of Contents
