Honda 2004 Odyssey Service Manual page 1454

'02 model With Side Airbag
SRS components are located in this area. Review the SRS component locations (see page 23-19), and the precautions
and procedures (see page 23-21) before performing repairs or service.
NOTE:
• Route the seat wire harness correctly (see page 20-94).
• Make sure the bushing and pivot washer are installed correctly.
• Apply multipurpose grease to the moving portion of the seat track.
• To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.
PIVOT NUT
8 x 1.25 mm
22 N·m (2.2 kgf·m, 16 lbf·ft)
SIDE AIRBAG HARNESS
WIRE TIE
SEAT CUSHION
CENTER COVER
WASHER
INNER SEAT TRACK
10 x 1.25 mm
47 N·m (4.8 kgf·m,
35 lbf·ft)
90°
10 x 1.25 mm
47 N·m (4.8 kgf·m,
35 lbf·ft)
SEAT-BACK
PIVOT WASHER
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
BUSHING
WASHER
CONNECTING WIRE
Twist 90° to connect.
SEAT RISER
HEADREST
HOOKS
10 x 1.25 mm
47 N·m (4.8 kgf·m, 35 lbf·ft)
END CAP
END CAP
WASHER
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
10 x 1.25 mm
47 N·m (4.8 kgf·m, 35 lbf·ft)
HOOK
HOOKS
RECLINE ADJUSTER/
OUTER SEAT TRACK
10 x 1.25 mm
47 N·m (4.8 kgf·m, 35 lbf·ft)
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
WASHER
CLIP
RECLINE
LEVER
RECLINE COVER
HEIGHT
KNOB
20-89