Conventional Brake Components
Parking Brake Shoe Replacement (cont'd)
8. Remove the rearward brake shoe by disconnecting
the parking brake cable (A) from the parking brake
lever (B).
A
9. Remove the U-clip (A), wave washer (B), and
parking brake lever (C) from the brake shoe.
B
A
19-32
Reassembly
1. Apply Molykote 44 MA grease to the sliding surface
of the pivot pin (A) of the rearward brake shoe (B).
B
2. Install the parking brake lever (C) and wave washer
(D) on the pivot pin, and secure with a new U-clip
(E).
3. Connect the parking brake cable (A) to the parking
C
brake lever (B).
B
E
D
• Install the wave washer with its convex side
facing out.
• Pinch the U-clip securely to prevent the parking
brake lever from coming out from the brake shoe.
A
A
C
B