Audio Unit Removal/Installation - Honda 2004 Odyssey Service Manual

Audio Unit Removal/Installation

SRS components are located in this area. Review the
SRS component locations, '99-01 models (see page 23-
18), '02 model (see page 23-19), '03-04 models (see
page 23-20), and the precautions and procedures (see
page 23-21) in the SRS before performing repairs or
service.
NOTE:
• Put on gloves to protect your hands.
• Take care not to scratch the dashboard and related
parts.
1. Make sure you have the anti-theft codes for the
radio and the navigation system, then write down
the frequencies for the radio's preset buttons.
2. Remove the center panel (see page 20-70)
3. Disconnect the audio unit connector (A) and the
antenna lead (B) from the audio unit.
4. Remove the screws (A) and the audio unit (B).
With Navigation System:
A
B
Without Navigation System:
A
5. Install in the reverse order of removal, and note
these items:
• Make sure the audio unit connectors are plugged
in properly, and the antenna lead is connected
properly.
• Enter the anti-theft codes for the radio and the
navigation system, then enter the customer's
radio station presets.
B
22-159