Input Shaft (Mainshaft) Speed Sensor Replacement; Output Shaft (Countershaft) Speed Sensor Replacement - Honda 2004 Odyssey Service Manual

Automatic Transmission
Input Shaft (Mainshaft) Speed
Sensor Replacement
1. Disconnect the input shaft (mainshaft) speed
sensor connector.
2. Remove the bolt securing the input shaft
(mainshaft) speed sensor, then remove the input
shaft (mainshaft) speed sensor (A) from the end
cover.
3. Install the new O-ring (B) on the input shaft
(mainshaft) speed sensor, then install the input
shaft (mainshaft) speed sensor in the end cover. Do
not allow dust or foreign particles to enter the
transmission.
4. Check the connector for rust, dirt, or oil, then
connect the connector securely.
14-364 14-364
B
A
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)
Output Shaft (Countershaft) Speed
Sensor Replacement
1. Disconnect the output shaft (countershaft) speed
sensor connector.
2. Remove the bolt securing the output shaft
(countershaft) speed sensor, then remove the
output shaft (countershaft) speed sensor (A) from
the transmission housing.
A
B
3. Install the new O-ring (B) on the output shaft
(countershaft) speed sensor, then install the output
shaft (countershaft) speed sensor in the
transmission housing. Do not allow dust or foreign
particles to enter the transmission.
4. Check for rust, dirt, or oil, then connect the
connector securely.
6 x 1.0 mm
12 N·m
(1.2 kgf·m, 8.7 lbf·ft)