Honda 2004 Odyssey Service Manual page 990

56. Remove the front mount bracket.
57. Remove the transmission housing mounting bolts.
58. Pull the transmission away from the engine until it
clears the dowel pins, then lower it on the
transmission jack.
NOTE: If the torque converter is stuck to the drive
plate, pull it toward the transmission housing
through the starter opening.
59. Remove the shift cable cover, then remove the
torque converter assembly from the torque
converter housing.
60. Inspect the drive plate, and replace it if it's
damaged.
61. Remove the 6 x 1.0 x 14 mm bolt (A) and nut (B)
from the shift cable cover (C).
B
A
C
14-377