Honda 2004 Odyssey Service Manual page 1959

Power Door Locks/Factory Keyless/Factory Security
Door Lock Actuator Test (cont'd)
Left Sliding Door
1. Remove the left sliding door panel (see page 20-13).
2. Disconnect the connector (A) from the actuator.
With Security:
Without Security:
3. Check actuator operation by connecting power and
ground according to the table. To prevent damage
to the actuator, apply battery voltage only
momentarily.
Terminal
Position
LOCK
UNLOCK
:With Security
4. If the actuator does not work as specified, replace it.
22-280
A
Termimal side of
male terminals
D1
D2
D2
D3
Right Sliding Door
1. Remove the right sliding door panel (see page 20-
13).
2. Disconnect the connector (A) from the actuator.
With Security:
Without Security:
3. Check actuator operation by connecting power and
ground according to the table. To prevent damage
to the actuator, apply battery voltage only
momentarily.
Terminal
Position
LOCK
UNLOCK
4. If the actuator does not work as specified, replace it.
A
Terminal side of
male terminals
E1 E2