Honda 2004 Odyssey Service Manual page 1154

Special Tools Required
• Cylinder end seal remover attachment
07TAF-SZ50100
• Driver 07749-0010000
• Attachment, 42 x 47 mm 07746-0010300
• Piston seal ring guide
07LAG-SM4010A or 07LAG-SM40100
• Piston seal ring sizing tool
07LAG-SM4020A or 07LAG-SM40200
• Pincer Oetiker 1098, or equivalent,
commercially available
NOTE: Refer to the Exploded View as needed during the
following procedure.
Removal
1. Remove the steering gearbox (see page 17-30).
Disassembly
2. Remove the boot band (A) and tie-rod clips (B). Pull
the boots away from the ends of the steering
gearbox.
B
3. Unbend the lock washer (A).
4. Hold the flat surface sections (A) on the right side
steering rack (B) with a wrench, and unscrew the
both rack ends (C) with another wrench. Be careful
not to damage the rack surface with the wrench.
Remove the lock washer (D) and stop washer (E).
A
A
C
D
E
A
B
(cont'd)
17-35