Atf Temperature Sensor Replacement - Honda 2004 Odyssey Service Manual

Automatic Transmission

ATF Temperature Sensor Replacement

1. Remove the transmission lower mount nuts.
2. Place the transmission jack under the transmission,
and lift it up until the studs of the transmission
lower front mount clear the subframe.
3. Remove the transmission lower front mount.
10 x 1.25 mm
38 N·m
(3.9 kgf·m, 28 lbf·ft)
14-366
10 x 1.25 mm
38 N·m (3.9 kgf·m,
28 lbf·ft)
4. Disconnect the connector (A) from the ATF
temperature sensor.
A 6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
B
5. Remove the bolts securing the sensor harness
clamp and ATF temperature sensor, then remove
the ATF temperature sensor (B).
6. Install the new ATF temperature sensor with a new
O-ring (C).
7. Install the harness clamp, then connect the
connector.
8. Install the transmission lower front mount.
9. Lower the transmission, then install the
transmission lower mount nuts.
10. Remove the transmission jack.
C