Honda 2004 Odyssey Service Manual page 1067

Shafts and Clutches
Clutch Disassembly (cont'd)
5. Set the special tool (A) on the spring retainer (B) of
the 2nd and 3rd clutches so the tool works on the
clutch return spring (C).
6. If either end of the special tool is set over an area of
the spring retainer which is unsupported by the
return spring, the retainer may be damaged.
7. Compress the spring until the snap ring can be
removed.
14-454
8. Remove the snap ring (A). Then remove the special
tool (B), spring retainer (C), and the return spring.
B
A
B
C
A
9. Wrap a shop rag around the clutch drum (A), and
apply air pressure to the fluid passage to remove
the piston (B). Place a finger tip on the other end
while applying air pressure.
B
A
C