Mainshaft Sealing Ring Replacement - Honda 2004 Odyssey Service Manual

Mainshaft Sealing Ring Replacement

The sealing rings are synthetic resin with chamfered
ends. Check the condition of the sealing rings, and
replace them only if they are worn, distorted, or
damaged.
1. For a better fit, squeeze sealing rings together
slightly before installing them.
2. Apply ATF to the new sealing rings then install
them on the mainshaft.
3. After installing the sealing rings, verify the
following:
• The rings are fully seated in the groove.
• The rings are not twisted.
• The chamfered ends of the rings are properly
joined.
14-443