Honda 2004 Odyssey Service Manual page 1104

Outboard Joint Side
1. Remove the boot bands (A). Lift up the three tabs
(B) with a screwdriver. Be careful not to damage
the boot.
2. Slide the outboard boot (A) partially to the inboard
joint side. Be careful not to damage the boot.
A
A
B
3. Wipe off the grease to expose the driveshaft and
the outboard joint inner race.
4. Make a mark (A) on the driveshaft (B) at the same
position of the outboard joint end (C).
A
5. Carefully clamp the driveshaft in a vise.
07XAC-001020A
6. Remove the outboard joint (A) using the special
tool and a commercially available 5/8'' slide
hammer (B).
B
C
B
A
(cont'd)
16-7