Honda 2004 Odyssey Service Manual page 1905

Wipers/Washers
Control Unit Input Test
1. Before testing the wiper/washer control functions, troubleshoot the multiplex control system (see page 22-244).
Driver's Multiplex Control Unit
2. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box, and disconnect its
connector.
3. Inspect all connector and socket terminals to be sure they are making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
• If the terminals look OK, go to step 4.
22-226
DRIVER'S UNDER-DASH FUSE/RELAY BOX SOCKET
(Driver's multiplex control unit connector A)
DRIVER'S MULTIPLEX CONTROL UNIT CONNECTOR B
GRN/RED (USA)
BLU/WHT GRN/WHT (Canada)
BLK
Wire side of female terminals