Honda 2004 Odyssey Service Manual page 1447

Seats
Front Seat Removal/Installation (cont'd)
5. For '03-04 models passenger's seat: Release the
tabs (A), and detach the clips, then remove the rear
riser cover (B).
Fastener Locations
: Clip, 4
A
6. For '03-04 models passenger's seat: Remove the
front seat belt lower anchor bracket from the front
seat outer weight sensor (see step 6 on page 23-4).
7. Slide the seat about halfway to the rear to access
the front riser cover. If equipped with an 8-way
power seat, fully raise the seat.
8. For '99-02 models and '03-04 models driver's seat:
Detach the clips, and remove the front riser cover
(A) from both sides.
Fastener Locations
: Clip, 2
A
20-82
B
A
9. For '03-04 models passenger's seat: Release the
tabs (A), and detach the clips, then remove the front
riser cover (B) from both sides.
Fastener Locations
: Clip, 2
A
10. For '02-04 models with side airbag: Disconnect the
negative cable from the battery, and wait at least
3 minutes before beginning work.
11. Remove the bolts securing the front seat (A).
Fastener Locations
: Bolt, 4
A
10 x 1.25 mm
B
A