Honda 2004 Odyssey Service Manual page 1000

51. Install the engine covers.
52. Refill the transmission with ATF (see step 5 on page
14-368).
53. Connect the battery positive terminal, then connect
the negative terminal.
54. Set the parking brake. Start the engine, and shift
the transmission through all gears three times.
55. Check the shift lever operation, A/T gear position
indicator operation, and shift cable adjustment.
56. Check and adjust the front wheel alignment (see
page 18-5).
57. Reinstall the support rod of the hood to the proper
location, and secure the windshield washer
reservoir opening with the bolt.
58. Start the engine, and let it reach normal operating
temperature (the radiator fan comes on) with the
transmission in the P or N position, then turn it off
and check the ATF level (see page 14-367).
59. Do the PCM idle learn procedure (see page 11-202).
60. Do the power window control unit reset procedure
(2003-2004 model) (see page 22-200).
61. Perform a road test (see page 14-352).
62. Enter the anti-theft code for the radio and the
navigation system, then enter the radio station
presets, and set the clock.
63. Loosen the front mount nut after the road test, then
retighten the nut to the specified torque.
12 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
14-387