Windshield Wiper Motor Replacement - Honda 2004 Odyssey Service Manual

Windshield Wiper Motor Replacement

1. Open the hood. Remove the nuts (A) and the
windshield wiper arms (B).
B
2. Remove the hood seal and cowl cover.
3. Disconnect the 5P connector (A) from the wiper
motor (B).
C
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
B
4. Remove the bolts (C), move windshield wiper
linkage assembly (D) toward the passenger's side
of the vehicle until it slides off of the pin (E), then
remove the assembly.
Remove and
replace the clips
A
24.5 N·m
(2.5 kgf·m, 18 lbf·ft)
D
A
E
5. Scribe a line (A) across the link and windshield
wiper linkage to show the original adjustment.
Separate the windshield wiper linkage (B) from the
wiper motor (C).
B
C
6. Install in the reverse order of removal, and note
these items:
• Grease the moving parts.
• Before reinstalling the wiper arms, turn the wiper
switch ON, then OFF to return the wiper shafts to
the park position.
• If necessary, replace any damaged clips.
• Check the wiper motor operation.
31 N·m (3.2 kgf·m,
23 lbf·ft)
A
8 N·m (0.8 kgf·m,
6.0 lbf·ft)
22-231