Honda 2004 Odyssey Service Manual page 997

Automatic Transmission
Transmission Installation (cont'd)
32. Install the splash shield.
33. Install the transmission housing mounting bolts.
14-384
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
34. Install and tighten the nut (A) on the front mount (B),
and install the ground cable (C) to the engine.
C
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
35. Remove the engine support hanger.
36. Connect the Primary HO2S connector (A), install it
on its connector bracket (B), and clamp the harness
in the clamp (C).
C
B
A
12 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
B
A