Honda 2004 Odyssey Service Manual page 1961

Power Door Locks/Factory Keyless/Factory Security
Door Lock Knob Switch Test (cont'd)
Left Sliding Door
1. Remove the left sliding door panel (see page 20-13).
2. Disconnect the connector (A) from the actuator.
With Security:
Without Security:
3. Check for continuity between the terminals in each
switch position according to the table.
Terminal
Position
LOCK
UNLOCK
: With Security
4. If the continuity is not as specified, replace the
switch.
22-282
A
Terminal side of
male terminals
D4 D3
D6
D1 D5
Right Sliding Door (With Security System)
1. Remove the right sliding door panel (see page 20-
13).
2. Disconnect the connector (A) from the actuator.
3. Check for continuity between the E3 and E4
terminals in each switch position.
• There should be continuity with the knob switch
in UNLOCK.
• There should be no continuity with the knob
switch in LOCK.
4. If the continuity is not as specified, replace the
switch.
A
Terminal side of
male terminals