Switch Test/Replacement - Honda 2004 Odyssey Service Manual

Hide thumbs Also See for 2004 Odyssey:

Table of Contents

Switch Test/Replacement

1. Remove the adjustment switch cover (A) from the

driver's seat by removing the three screws, and

pulling off the adjustment switch knobs (B).

2. Disconnect the 6P connectors (C) from the

adjustment switch (D), then remove the switch

from the cover by removing its two mounting

3. Reinstall the adjustment switch knobs.

4. Check for continuity between the terminals in each

switch position according to the table.

A1 A2 A3 A4 A5 A6 B1 B2 B3 B4 B5 B6

5. If the continuity is not as specified, replace the

Table of Contents