Headlight Replacement
Headlights become very hot during use; do not
touch them or any attaching hardware immediately
after they have been turned off.
1. Remove the front bumper (see page 20-128).
2. Disconnect the connectors (A) from the headlight.
HEADLIGHT
(High):
(Low):
FRONT TURN SIGNAL/
SIDE MARKER LIGHT:
3. Remove the four mounting bolts, then remove the
headlight assembly.
60 W
55 W
21/5 W
A
4. Install the headlight in the reverse order of removal.
5. After replacement, adjust the headlights to local
requirements (see page 22-130).
22-129