Honda 2004 Odyssey Service Manual page 1239

Conventional Brake Components
Parking Brake Cable Replacement (cont'd)
NOTE:
• The parking brake cable must not be bent or distorted.
This will lead to stiff operation and premature failure.
• Refer to the Exploded View as needed during this
procedure.
Rear Drum Brake: '99-01 Models
1. Release the parking brake pedal fully, and
disconnect the parking brake cable from the pedal.
2. Remove the brake shoe assembly (see page 19-21).
3. Remove the parking brake cable mounting bolts.
4. Remove the parking brake cable (A) from the
backing plate (B) using a 12 mm offset wrench (C).
A
5. Install the parking brake cable in the reverse order
of removal.
19-38
Rear Disc Brake: '02-04 Models
1. Remove the parking brake shoes, and disconnect
the parking brake cable from the brake shoe (see
page 19-31).
2. Remove the parking brake cable (A) from the
backing plate (B) using a 12 mm offset wrench (C).
B
3. Install the parking brake cable in the reverse order
of removal, and adjust the parking brake (see page
19-7). Apply the parking brake firmly 10 times, then
adjust it again.
C
B
A
C