Honda 2004 Odyssey Service Manual page 1263

ABS Components
DTC Troubleshooting (cont'd)
8. Connect the appropriate modulator unit connector
solenoid circuit terminal to body ground with a
jumper wire (see table).
DTC
31: FR-IN
32: FR-OUT
33: FL-IN
34: FL-OUT
35: RR-IN
36: RR-OUT
37: RL-IN
38: RL-OUT
MODULATOR UNIT CONNECTOR
RR-IN (RED/WHT)
FL-IN (RED/BLU)
FL-OUT
(YEL/BLU)
RR-OUT
(YEL/WHT)
JUMPER WIRE
Terminal side of female terminals
19-62
Appropriate Terminal
No. 1
No. 5
No. 4
No. 8
No. 3
No. 7
No. 2
No. 6
RL-IN (RED/GRN)
FR-IN (RED/BLK)
FR-OUT
(YEL/BLK)
RL-OUT
(YEL/GRN)
9. Check for continuity between the appropriate ABS
control unit connector B (12P) solenoid circuit
terminal and body ground (see table).
DTC
31: FR-IN
32: FR-OUT
33: FL-IN
34: FL-OUT
35: RR-IN
36: RR-OUT
37: RL-IN
38: RL-OUT
ABS CONTROL UNIT CONNECTOR B (12P)
FL-OUT (YEL/BLU)
RR-OUT
(YEL/WHT)
RR-IN (RED/WHT)
FL-IN (RED/BLU)
Wire side of female terminals
Is there continuity?
YES Go to step 10.
NO Repair open in the appropriate solenoid
circuit wire between the ABS control unit and the
modulator unit.
10. Remove the jumper wire from the modulator unit
connector.
11. Connect the modulator unit connector.
Appropriate Terminal
No. 11
No. 6
No. 9
No. 4
No. 8
No. 3
No. 10
No. 5
RL-OUT (YEL/GRN)
FR-OUT
(YEL/BLK)
FR-IN (RED/BLK)
RL-IN (RED/GRN)