6. If necessary, remove the screw and release the
hook (A), then remove the recline inner cover (B)
from each side.
Fastener Locations
: Screw, 6
B
7. Pull back the edge of the seat-back cover (A) all the
way around, and release the clips (B) and fasteners
(C) ('02-04 models leather seat).
'99-04 models (Non-leather seat)
B
'02-04 models (Leather seat)
C
A
B
A
10. Install the cover in the reverse order of removal,
A
8. Lift and pull out the release buttons (A), and
remove the screws (B), then remove all the
headrest guide (C, D).
C
C
9. Remove the seat-back cover (E).
and note these items:
• To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing all the clips and
fasteners ('02-04 models leather seat).
• Replace the any clips you removed with new
ones.
B
A
E
D
(cont'd)
20-125