Honda 2004 Odyssey Service Manual page 1134

Power Steering Hose, Line, and Pressure Switch Replacement
Note these items during installation:
• Connect each hose to the corresponding line securely until it contacts the stop on the line. Install the clamp or
adjustable clamp at the specified distance from the hose end as shown.
• Check all clamps for deterioration or deformation; replace with the clamps new ones if necessary.
• Add the recommended power steering fluid to the specified level on the reservoir and check for leaks.
ADJSTABLE HOSE CLAMP (A)
2.5 5.5 mm
(0.10 0.22 in.)
6 x 1.0 mm
11 N·m (1.1 kgf·m,
8 lbf·ft)
A
B
2.0 4.0 mm
(0.08 0.16 in.)
POWER STEERING PRESSURE SWITCH
10 x 1.25 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
CYLINDER LINES
13 N·m (1.3 kgf·m,
9.4 lbf·ft)
A
'00-04 models:
HOSE CLAMP (B)
2.5 5.5 mm
(0.10 0.22 in.)
RETURN LINE
16 x 1.5 mm
28 N·m (2.9 kgf·m, 21 lbf·ft)
A
FEED HOSE
14 x 1.5 mm
37 N·m (3.8 kgf·m, 27 lbf·ft)
CYLINDER LINES
13 N·m (1.3 kgf·m, 9.4 lbf·ft)
17-15