Honda 2004 Odyssey Service Manual page 1440

12. Remove the bolts (A, B, C, D), and lift up on the dashboard (E) to release the dashboard and steering hanger beam
(F) from the guide pins (G).
Fastener Locations
A : Bolt, 2
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
G
C
C
G
C
13. Carefully remove the dashboard through the front door opening:
14. Install the dashboard in the reverse order of removal, and note these items:
• Make sure the dashboard fits onto the guide pins correctly.
• Before tightening the bolts, make sure the dashboard wire harness and steering hanger beam wire harness are
not pinched.
• Make sure the connectors are plugged in properly, and the antenna lead is connected properly.
• Reconnect the negative cable to battery.
• Enter the anti-theft code for the radio and the navigation system, then enter the customer's radio station presets.
• Reset the clock.
• Do the PCM idle learn procedure (see page 11-202), and the power window control unit reset procedure ('03-04
models) (see page 22-200).
B : Bolt, 7
C : Bolt, 3
B B
A
B
B
B
D : Bolt, 2
F
E
G
B
B
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
G
D
D
A
20-75