3. Remove the bolts (A, B), then remove the front bumper beam (C) and both corner upper beams (D). If necessary,
remove the absorber (E).
Fastener Locations
A
: Bolt, 6
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
D
A
A
A
E
4. Install the front bumper in the reverse order of removal, and note these items:
• Make sure the front bumper engages the side clips, and the hooks (of the center and corner upper beams) on
each side securely.
• Replace any damaged clips.
• Push the clips into place securely.
B
: Bolt, 6
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
B
B
B
B
B
C
A
A
A
D
20-129