Transmission Range Switch Replacement - Honda 2004 Odyssey Service Manual

A/T Gear Position Indicator

Transmission Range Switch Replacement

1. Raise the vehicle, and make sure it is securely
supported.
2. Shift to the N position.
3. Remove the transmission range switch connector
(A) from the connector bracket (B), then disconnect
the connector.
4. Remove the harness clamp (C) from its bracket (D).
14-404
B
A
C
D
5. Remove the clamp from the clamp bracket on the
transmission housing, and remove the harness
holder (A) from the end cover (B).
B
6. Remove the transmission range switch cover (C),
then remove the transmission range switch (D)
from the end cover.
7. Set the new transmission range switch to the N
position.
NOTE: The transmission range switch clicks in the
N position.
A
C
D