Honda 2004 Odyssey Service Manual page 1423

Interior Trim
Trim Removal/Installation - Door Area
NOTE:
• Put on gloves to protect your hands.
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
• Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown.
2. Install the trim in the reverse order of removal, and note these items:
• Replace any damaged clips.
• Push the clips into place securely.
• Apply liquid thread lock to the anchor bolts before reinstallation.
• Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts.
• Before installing the sliding door opening trim, fill the bottom of the channel with clear sealant in the area
indicated by the arrow.
Sealant: Cemedine P/N 08712-0004, or equivalent
Fastener Locations
A : Clip, 3
SLIDING DOOR
OPENING TRIM
Remove the sliding door
lower roller.
REAR SIDE
TRIM PANEL
'03-04 models
20-58
B : Clip, 1 C : CIip, 1
(White)
SEALANT
3600 mm
(141.7 in.)
UPPER
ANCHOR
COVER
700 mm
D
(27.6 in.)
E
D
E
SLIDING DOOR
SILL TRIM
SLIDING DOOR
LOWER
WEATHERSTRIP
GROMMET
LOWER ANCHOR
COVER
FRONT SEAT BELT
LOWER ANCHOR BOLT
7/16-20 UNF
RIGHT CENTER PILLAR
32 N·m (3.3 kgf·m, 24 lbf·ft)
LOWER TRIM PANEL
D : Clip, 9 E : Clip, 3
(White) (Black)
FRONT SEAT BELT UPPER ANCHOR BOLT
7/16-20 UNF
32 N·m (3.3 kgf·m, 24 lbf·ft)
CENTER PILLAR
UPPER TRIM
C
A
D
A
E
D
D
FRONT DOOR
SILL TRIM
Remove the fuel fill
A
door opener knob.
CENTER PILLAR
LOWER TRIM PANEL
A Portions
F : Clip, 1
HOOK
DOOR OPENING
TRIM
FRONT SEAT BELT
SHOULDER ANCHOR
ADJUSTER
FRONT PILLAR TRIM
D
D
FRONT DOOR
OPENING TRIM
D
B
A
A
A
F
D KICK PANEL
A