Honda 2004 Odyssey Service Manual page 1652

Climate Control Panel Removal and
Installation
With Navigation System
1. Remove the instrument panel with the climate
control panel (see page 20-70).
2. Remove the self-tapping screws and the climate
control panel (A) from the instrument panel (B).
3. Install the control panel in the reverse order of
removal. After installation, operate the climate
control panel to see whether it works properly.
4. Run the self-diagnosis function to confirm that
there are no problems in the system (see page 21-
67).
Climate Control Unit Disassembly
and Reassembly
Without Navigation System
1. Remove the fan switch (A) and temperature control
A
B
2. Reassemble the control unit in the reverse order of
dials (B), then remove the front (C), temperature
control (D) and fan switch (E) panels. Remove the
A/C switch (F), MODE control switch (G), AUTO
switch (H), OFF switch (I), recirculation control
switch (J), front defroster switch (K) and rear
defogger switch (L) buttons.
D
F
I
H
L
B
K
C
J
A
removal.
E
G
21-121 21-121