Steering Column/Tilt Lever Inspection/Adjustment
• Check the steering column ball bearing (A) and the steering joint bearings (B) for play and proper movement. If any
bearing is noisy or has excessive play, replace the steering column as an assembly.
• Check the retaining collar (C) for damage. If it is damaged, replace the steering column as an assembly.
• Check the absorbing plates (D), absorbing plate guides (E) and sliding capsules (F) for distortion or breakage. If there
is distortion or breakage, replace the steering column as an assembly. The sliding capsule is attached to the column
bracket with the plastic injections (G).
A
G
D
F
E
B
C
E
D
(cont'd)
17-27