Honda 2004 Odyssey Service Manual page 1470

10. For '99-01 models: Release all the clips (A)
fastening the seat-back cover (B) and frame wire (C).
A
B
11. Lift and pull out the release button (A), and remove
the screw (B), then remove the headrest guide (C).
B
A
D
12. Remove the seat back cover (D).
13. Install the cover in the reverse order of removal,
and note these items:
• To prevent wrinkles when installing a seat-back
C
• Replace any clips (A) you removed with new
• With side airbag ('02-04 models): Use only
C
cover, make sure the material is stretched evenly
over the pad before securing the hook, clips and
inside springs.
ones using commercially available upholstery
ring pliers (B).
original Honda replacement seat-back covers.
A
B
(cont'd)
20-105