Shift Lever Installation - Honda 2004 Odyssey Service Manual

Shift Lever Installation

SRS components are located in this area. Review the
SRS component locations, 2002 model (see page 23-19),
2003-2004 models (see page 23-20), and the
precautions and procedures (see page 23-21) in the SRS
before performing repairs or service.
1. Install the shift lever assembly on the steering
column.
2. Turn the ignition switch ON (II), and verify that the
N position indicator comes on.
3. Install the shift cable end to the shift lever. If
necessary, adjust the shift cable (see step 5 on
page 14-395).
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
14-391