Honda 2004 Odyssey Service Manual page 1819

Entry Lights Control System
Control Unit Input Test
1. Before testing the entry light control functions, troubleshoot the multiplex control system (see page 22-244).
Driver's Multiplex Control Unit
2. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
• If the terminals look OK, go to step 4.
22-140
DRIVER'S UNDER-DASH FUSE/RELAY BOX SOCKET
(Driver's multiplex control unit connector A)
DRIVER'S MULTIPLEX CONTROL UNIT CONNECTOR B
RED/GRN
Wire side of female terminals
DRIVER'S UNDER-DASH FUSE/RELAY BOX CONNECTOR A
Wire side of female terminals
DRIVER'S UNDER-DASH FUSE/RELAY BOX CONNECTOR O
Wire side of female terminals
GRN/ORN
GRN/YEL
BLU/WHT