Hazard Warning Switch Test - Honda 2004 Odyssey Service Manual

Hazard Warning Switch Test

With Navigation System
1. Remove the center panel (see page 20-70).
2. Disconnect the 10P connector (A) from the hazard
warning switch (B).
B
D
3. Push out the hazard warning switch from behind
the center panel (C).
4. Check for continuity between the terminals in each
switch position according to the table.
Terminal
6
Position
OFF
ON
5. If the continuity is not as specified, replace the bulb
(D) or the switch.
A
C
7 1 2 3 5
9 10
Without Navigation System
1. Remove the instrument panel (see page 20-69).
2. Disconnect the 10P connector (A) from the hazard
warning switch (B).
D
B
3. Pull the hazard warning switch out from the clock
(C).
4. Check for continuity between the terminals in each
switch position according to the table.
Terminal
1
Position
OFF
ON
5. If the continuity is not as specified, replace the bulb
(D) or the switch.
A
C
2 3 4 5 6 8 10
22-137 22-137