Servo Body Disassembly, Inspection, And Reassembly - Honda 2004 Odyssey Service Manual

Valve Body

Servo Body Disassembly, Inspection, and Reassembly

1. Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air. Blow out all
passages.
2. Check all valves for free movement. If any fail to slide freely, refer to Valve Body Repair (see page 14-428).
3. Replace the valve body as an assembly if any parts are worn or damaged.
4. Coat all parts with ATF during assembly.
SERVO BODY
Inspect for scoring
and damage.
O-RING
Replace.
SPRING SPECIFICATIONS
No.
CPC valve A spring
CPC valve B spring
Shift valve B spring
Shift valve A spring
14-434
CPC VALVE A
SERVO VALVE/
SHIFT FORK SHAFT
Spring
CPC VALVE B
Standard (New)-Unit: mm (in.)
Wire Dia. O.D.
0.7 (0.028) 6.1 (0.240)
0.7 (0.028) 6.1 (0.240)
0.8 (0.031) 6.6 (0.260)
0.8 (0.031) 6.6 (0.260)
SHIFT VALVE B
VALVE CAP
VALVE CAP CLIP
SPRING SEAT
SHIFT VALVE A
Free Length No. of Coils
17.8 (0.701) 7.9
17.8 (0.701) 7.9
49.1 (1.933) 21.7
49.1 (1.933) 21.7