Honda 2004 Odyssey Service Manual page 1318

12. Connect ABS fail-safe relay connector terminal
No. 2 to body ground with a jumper wire. The wire
colors of the ABS fail-safe relay connector are WHT
/GRN, BRN/BLK, BLK, and YEL/GRN.
ABS FAIL-SAFE RELAY CONNECTOR
SOLENOID
(BRN/BLK)
JUMPER
WIRE
Terminal side of female terminals
13. Check resistance between appropriate ABS/TCS
control unit connector C (12P) terminal and body
ground (see table).
IN: 8 10 (at 68°F, 20°C)
OUT: 3 5 (at 68°F, 20°C)
DTC
31: FR-IN
32: FR-OUT
33: FL-IN
34: FL-OUT
35: RR-IN
36: RR-OUT
37: RL-IN
38: RL-OUT
ABS/TCS CONTROL UNIT CONNECTOR C (12P)
FL-OUT (YEL/BLU)
RR-OUT (YEL/WHT)
RR-IN (RED/WHT)
FL-IN (RED/BLU)
Wire side of female terminals
Is the resistance OK ?
YES Go to step 14.
NO Replace the modulator unit.
Appropriate Terminal
No. 11
No. 6
No. 9
No. 4
No. 8
No. 3
No. 10
No. 5
RL-OUT (YEL/GRN)
FR-OUT (YEL/BLK)
FR-IN (RED/BLK)
RL-IN (RED/GRN)
14. Disconnect the modulator unit connector, and
remove the jumper wire from the ABS fail-safe
relay connector terminal.
15. Check for continuity between appropriate ABS/TCS
control unit connector C (12P) terminal and all other
ABS and TCS solenoid circuit terminals (see table).
DTC
31: FR-IN
32: FR-OUT
33: FL-IN
34: FL-OUT
35: RR-IN
36: RR-OUT
37: RL-IN
38: RL-OUT
ABS/TCS CONTROL UNIT CONNECTOR C (12P)
RR-OUT
(YEL/WHT)
RR-IN FL-IN
(RED/BLU) (RED/GRN) (RED/BLK)
(RED/WHT)
Wire side of female terminals
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
NCL
NOL
(YEL/GRN) (RED/GRN)
NCR
NOR
(GRY) (LT BLU)
Wire side of female terminals
Is there continuity?
YES Repair short in the appropriate wires
between the ABS/TCS control unit and the
modulator unit.
NO Go to step 16.
Appropriate Terminal
No. 11
No. 6
No. 9
No. 4
No. 8
No. 3
No. 10
No. 5
FL-OUT
RL-OUT FR-OUT
(YEL/BLU)
(YEL/GRN) (YEL/BLK)
RL-IN FR-IN
(cont'd)
19-117