Honda 2004 Odyssey Service Manual page 899

Automatic Transmission
System Description (cont'd)
Electronic Control System (cont'd)
PCM Inputs and Outputs (cont'd)
A (32P)
PCM CONNECTOR D (16P)
Terminal Wire
Number color
D1 YEL
D2 GRN/WHT
D3 GRN
D5 BLK/YEL
D6 WHT
D7 BLU/YEL
14-286
PCM Connector Terminal Locations
B (25P) C (31P)
Signal Description
LC Torque converter clutch
solenoid valve control
SH B Shift solenoid valve B control
SH C Shift solenoid valve C control
VB SOL Power supply for solenoid
valves (Fuse No. 6 in driver's
under-dash fuse/relay box)
ATP R Transmission range switch R
position input
SH A Shift solenoid valve A control
E (20P)
D (16P)
Measuring Conditions/Terminal Voltage
During lock-up condition: Battery voltage
During no lock-up condition: 0 V
Battery voltage in these positions:
• 1, 2
• D and D3 in 1st , 2nd, and 3rd gear
• P, R, and N
0 V in these positions:
• D in 4th and 5th gear
Battery voltage in these positions:
• 1
• D and D3 in 1st, 3rd and 5th gear
0 V in these positions:
• 2
• D and D3 in 2nd gear
• D in 4th gear
• P, R, and N
With ignition switch ON (II): Battery voltage
With ignition switch OFF: 0 V
In the R position: 0 V
In other than the R position: Battery voltage
Battery voltage in these positions:
• 1, 2
• D and D3 in 1st and 2nd gear
• D in 5th gear
0 V in these positions:
• D and D3 in 3rd gear
• D in 4th gear
• P, R, and N