Clutch Reassembly - Honda 2004 Odyssey Service Manual

Shafts and Clutches

Clutch Reassembly

Special Tools Required
• Clutch spring compressor attachment
07LAE-PX40100
• Clutch spring compressor attachment
07HAE-PL50101
• Clutch spring compressor bolt assembly
07GAE-PG40200 or 07GAE-PG4020A
• Clutch compressor attachment
07ZAE-PRP0100
Note these items during reassembly:
• Clean all parts thoroughly in solvent or carburetor
cleaner, and dry them with compressed air.
• Blow out all passages.
• Apply ATF to all parts before assembly.
1. Soak the clutch discs thoroughly in ATF for a
minimum of 30 minutes.
2. Inspect the check valve (A) on the clutch pistons
(B); if it's loose or stuck, replace the piston.
B
14-222
A
3. Install new O-rings (A) on the piston (B).
A
A
4. Install the piston (A) in the clutch drum (B). Apply
pressure and rotate to ensure proper seating.
Lubricate the piston O-ring with ATF before
installing. Do not pinch the O-ring by installing the
piston with too much force.
A
B
A
B
B