Valve Body Valve Reassembly
1. Coat all parts with ATF before assembly.
2. Install the valves and springs in the sequence
shown for the main valve body (see page 14-198),
regulator valve body (see page 14-201), and servo
body (see page 14-202). Refer to the following
valve cap illustrations, and install each valve cap so
the end shown facing up will be facing the outside
of the valve body.
3. Install all the springs and seats. Insert the spring (A)
in the valve, then install the valve in the valve body
(B). Push the spring in with a screwdriver, then
install the spring seat (C).
C
A
B
14-197