Honda 2004 Odyssey Service Manual page 765

Automatic Transmission
Transmission Installation (cont'd)
32. Install the splash shield.
33. Install the transmission housing mounting bolts.
14-152
12 x 1.25 mm
64 N·m
(6.5 kgf·m, 47 lbf·ft)
34. Install and tighten the nut (A) on the front mount.
A
12 x 1.25 mm
54 N·m (5.5 kgf·m, 40 lbf·ft)
B
35. Connect the vacuum tube (B).
36. Remove the engine hanger.
37. Connect the A/T gear position switch connector (A),
then install it on its connector bracket (B).
D
38. Connect the connectors to the countershaft speed
sensor (C) and the 2nd clutch pressure switch (D).
Do not allow, fluid, oil, dust, or other foreign
particles to enter the connectors.
A
B
C